378 RACADM Subcommand Overview
Synopsis
racadm racdump
Description
The racdump subcommand provides a single command to get dump, status,
and general iDRAC6 board information.
The following information is displayed when the racdump subcommand is
processed:
• General system/RAC information
• Coredump
• Session information
• Process information
• Firmware build information
Supported Interfaces
• Remote RACADM
• telnet/ssh RACADM
traceroute
NOTE: To use this command, you must have Administrator permission.
Table A-50 describes the traceroute subcommand.
racdump Displays status and general iDRAC6 information.
Table A-50. traceroute
Subcommand Definition
traceroute Traces the network path of routers that packets take
as they are forwarded from your system to a
destination IPv4 address.
Table A-49. racdump
To Next Page
Loading...
