Dell IDRAC6 - fwupdate

RACADM Subcommand Overview 369
Legal Values
0 = Enable
1 = Disable
Supported Interfaces
•Local RACADM
fwupdate
NOTE: To use this command, you must have Configure iDRAC6 permission.
Table A-38 describes the fwupdate subcommand.
Synopsis
racadm fwupdate -s
racadm fwupdate -g -u -a <
TFTP_Server_IP_Address > [-d
<
path >]
racadm fwupdate -p -u -d <path>
racadm fwupdate -r
Description
The fwupdate subcommand allows users to update the firmware on iDRAC6.
The user can:
• Check the firmware update process status
• Update iDRAC6 firmware from a TFTP server by providing an IP address
and optional path
• Rollback to the standby firmware
Table A-38. fwupdate
Subcommand Definition
fwupdate Updates the firmware on iDRAC6