RACADM Subcommand Overview 357
• telnet/ssh RACADM
clrsel
Synopsis
racadm clrsel
Description
The clrsel command removes all existing records from the System Event Log
(SEL).
Supported Interfaces
•Local RACADM
• Remote RACADM
• telnet/ssh RACADM
gettracelog
Table A-22 describes the gettracelog subcommand.
Synopsis
racadm gettracelog -i
racadm gettracelog [-A] [-o] [-c count] [-s
startrecord] [-m]
Description
The gettracelog (without the -i option) command reads entries.
The following gettracelog entries are used to read entries:
Table A-22. gettracelog
Command Definition
gettracelog -i Displays the number of entries in the iDRAC trace
log.
gettracelog Displays the iDRAC trace log.
To Next Page
Loading...
