Dell IDRAC6 - config

336 RACADM Subcommand Overview
Output
The racadm help command displays a complete list of subcommands.
The racadm help <subcommand> command displays information for the
specified subcommand only.
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh RACADM
config
Table A-2 describes the config subcommand.
Synopsis
racadm config [-c|-p] -f < filename >
racadm config -g <
groupName > -o < objectName > [-i
<
index >] < value >
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh RACADM
Description
The config subcommand allows you to set iDRAC6 configuration parameters
individually or to batch them as part of a configuration file. If the data is
different, that iDRAC6 object is written with the new value.
Table A-2. config/getconfig
Subcommand Definition
config Configures iDRAC6.