Dell IDRAC6 - getraclog

RACADM Subcommand Overview 353
Synopsis
racadm serveraction < action >
Description
The serveraction subcommand enables users to perform power management
operations on the host system. Table A-17 describes the serveraction power
control options.
Output
The serveraction subcommand displays an error message if the requested
operation could not be performed, or a success message if the operation
completed successfully.
Supported Interfaces
•Local RACADM
• Remote RACADM
• telnet/ssh RACADM
getraclog
Table A-18 describes the racadm getraclog command.
Table A-17. serveraction Subcommand Options
String Definition
<action> Specifies the action. The <action> string options are:
• powerdown — Powers down the managed server.
•
powerup — Powers up the managed server.
•
powercycle — Issues a power-cycle operation on the managed server.
This action is similar to pressing the power button on the system’s
front panel to power down and then power up the system.
•
powerstatus — Displays the current power status of the server ( ON ,
or
OFF ).
•
hardreset — Performs a reset (reboot) operation on the managed server.