Administrator action
Contact Dell EMC PowerScale Technical Support to determine if a replacement node is required.
Gather logs, and then contact Technical Support for additional troubleshooting. For instructions on how to gather cluster logs,
see Gathering cluster logs.
900160002
A node cannot connect to its peer node.
Description
When a node is disconnected from its peer node, the node journals are not mirrored and data is at risk. The event message
provides you with the chassis and node slot where the disconnected node is located.
Administrator action
Contact Dell EMC PowerScale Technical Support to determine if a replacement node is required.
Gather logs, and then contact Technical Support for additional troubleshooting. For instructions on how to gather cluster logs,
see Gathering cluster logs.
900160003
A compute node has failed and might need to be replaced.
Description
The event message provides you with the chassis and node slot where the failed node is located.
The compute node is not a customer-replaceable part.
Administrator action
Contact Dell EMC PowerScale Technical Support to determine if a replacement node is required.
Gather logs, and then contact Technical Support for additional troubleshooting. For instructions on how to gather cluster logs,
see Gathering cluster logs.
900160004
A DIMM fault was detected.
Description
This event appears because a DIMM has failed, is poorly seated, or an incorrect type of DIMM is installed.
The event message provides you with the chassis and node slot where the DIMM is located.
A DIMM is not a customer-replaceable part.
184
Hardware events
To Next Page
Loading...
Need help?
General