Administrator action
1. Wait to see if the delayed reboot state clears and the node is restored.
2. If the node resets, monitor the node to make sure it successfully rejoins the cluster.
3. If issues with the node persist, contact Dell EMC PowerScale Technical Support to determine if maintenance is required.
Gather logs, and then contact Technical Support for additional troubleshooting. For instructions on how to gather cluster
logs, see Gathering cluster logs.
900160100
A network interface card (NIC) is not available in the specified node.
Administrator action
Troubleshooting is required to determine if the data compression NIC must be replaced.
900160102
A network interface card (NIC) reset occurred in the specified node.
Description
The NIC reset is an information-only event. In the rare instance that a compression NIC resets, this event provides a tracking
marker for Dell EMC PowerScale Technical Support.
Administrator action
No action is required.
900160101
A network interface card (NIC) is not operating correctly in the specified node.
Administrator action
Troubleshooting is required to determine if the data compression NIC must be replaced.
900170001
The IP address assigned to the BMC LAN interface by the DHCP server overlaps with a subnet already in use by the external
network. The BMC LAN IP address is not tracked and used in validation for the external interfaces. {msg}
Administrator action
If DHCP is used for the BMC LAN address range, ensure that the external interface IP allocation does not overlap.
192
Hardware events
To Next Page
Loading...
Need help?
General