100010055
A drive that is write-cache enabled was installed in a Generation 6 platform. Write-cache enabled drives are not compatible with
Generation 6 nodes and the drive has been smartfailed.
Description
A write-cache enabled drive was installed in a 6th Generation node and is not compatible with the node. The drive was
smartfailed. The event message provides you with the chassis serial number, node, sled, the drive slot number within the sled,
drive type, and Logical Number (LNUM) of the drive.
Administrator action
Replace the drive with a compatible drive according to the instructions in the PowerScale Drive Replacement Guide for your
platform.
100010056
The write-cache is enabled for a drive in a Generation 6 platform. Write-cache enabled drives are not compatible with
Generation 6 nodes.
Description
A write-cache enabled drive was installed in a 6th Generation node and is not compatible with the node. The event message
provides you with the chassis serial number, node, sled, the drive slot number within the sled, drive type, Logical Number
(LNUM), and serial number of the drive.
Administrator action
Replace the drive with a compatible drive according to the instructions in the PowerScale Drive Replacement Guide for your
platform.
100010057
There is a missing m.2 card on Gen6.
Description
There is a missing m.2 card in a Generation 6 node.
Administrator action
Replace the m.2 card.
50
Software events
To Next Page
Loading...
Need help?
General