Administrator action
Contact Dell EMC PowerScale Technical Support to determine if a replacement DIMM is required.
Gather logs, and then contact Technical Support for additional troubleshooting. For instructions on how to gather cluster logs,
see Gathering cluster logs.
900160005
A node has powered down in response to a thermal issue.
Description
A node powered down to protect it from a thermal event. The elevated temperature might be the result of:
● a hardware fault that has increased the temperature inside the node.
● a high ambient temperature in the data center.
The event message provides you with the chassis and node slot of the node that powered down.
Administrator action
If the temperature is consistently elevated, the problem is likely a high ambient temperature in the data center. Address any
changes in the cluster environment such as air conditioning outages. Verify that air flow within the rack, and through the front
and rear panel vents of the chassis, is not obstructed in any way.
If the event persists, gather logs, and then contact Technical Support for additional troubleshooting. For instructions on how to
gather cluster logs, see Gathering cluster logs.
900160006
Fan fault detected.
Description
A node fan has failed. The fan module must be replaced. The fan module is not a customer-replaceable part.
The event message provides you with the chassis and node slot of the affected node.
Administrator action
Gather logs, and then contact Technical Support for additional troubleshooting. For instructions on how to gather cluster logs,
see Gathering cluster logs.
900160007
Power supply fault detected.
Description
A power supply has failed. The power supply must be replaced. A power supply is a customer-replaceable part.
The event message provides you with the chassis and node slot of the affected node.
Hardware events
185
To Next Page
Loading...
Need help?
General