100010035
A drive that previously failed was inserted as a replacement.
Description
A drive that previously failed was installed as a replacement. The event message provides you with the current node, bay,
location, drive type, and Logical Number (LNUM) of the drive.
Administrator action
Replace the failed drive with a new drive according to the instructions in the PowerScale Drive Replacement Guide for your
platform.
100010036
The disk repair process for a drive is complete.
Description
The smartfail process has completed and the specified drive is ready to be replaced. The event message provides you with the
current node, bay, location, drive type, and Logical Number (LNUM) of the drive.
Administrator action
Replace the drive with a new drive according to the instructions in the PowerScale Drive Replacement Guide for your platform.
100010037
A new drive was not formatted correctly, and as a result, the drive was not added to the filesystem.
Description
A drive that was installed in a node was not formatted correctly. The event message provides you with the current node, bay,
location, drive type, and Logical Number (LNUM) of the drive.
Administrator action
Take one of the following actions to resolve the issue:
● You can try to format the drive again to see if that resolves the issue.
● Replace the drive with a new drive according to the instructions in the PowerScale Drive Replacement Guide for your
platform.
Software events
45
To Next Page
Loading...
Need help?
General