Administrator action
The inline dedupe index issue is not critical, and can be safely ignored. Inline dedupe is enabled and fully effective but the index
is fragmented. The issue might be resolved by completing the following steps:
1. Disable inline dedupe.
2. Free up memory by running the isi_flush command.
3. Enable inline dedupe.
4. If the issue does not resolve, restart the node.
400180005
Inline dedupe index has non-standard layout on node {lnn}, occurrence {occurrence}
Description
Inline dedupe was unable to allocate the preferred structure for the index so has changed the layout to preserve the requested
size.
Administrator action
The inline dedupe index issue is not critical, and can be safely ignored. Inline dedupe is enabled and fully effective but the index
is fragmented. The issue might be resolved by completing the following steps:
1. Disable inline dedupe.
2. Free up memory by running the isi_flush command.
3. Enable inline dedupe.
4. If the issue does not resolve, restart the node.
400190001
Invalid dedupe directory {path}
Description
SmartDedupe has been configured with an invalid path, or a non-existent directory.
Administrator action
Check the paths in the SmartDedupe configuration and verify that they exist:
● If the directory exists but is not accessible then raise contact Dell EMC Technical support. If the event persists, gather
logs, and then contact Technical Support for additional troubleshooting. For instructions on how to gather cluster logs, see
Gathering cluster logs.
● If the directory does not exist then remove it from the dedupe configuration.
Software events
93
To Next Page
Loading...
Need help?
General