Dell(conf)#
Dell(conf)#hardware forwarding-table mode scaled-l3-hosts
Hardware forwarding-table mode is changed. Save the configuration and
reload to take effect.
Dell(conf)#end
Dell#write mem
!
01:13:36: %STKUNIT0-M:CP %FILEMGR-5-FILESAVED: Copied running-config to
startup-config in flash by default
Dell(conf)#
Dell(conf)#end
Dell#01:13:44: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from console
Dell#
2. Display the hardware forwarding table mode in the current boot and in the next boot.
EXEC Privilege
show hardware forwarding-table mode
Dell#show hardware forwarding-table mode
Current Settings Next Boot Settings
Mode : Default scaled-l3-routes
L2 MAC Entries : 160K 32K
L3 Host Entries : 144K 16K
L3 Route Entries : 16K 128K
Dell#
Content Addressable Memory (CAM)
229
To Next Page
Loading...
