Dell S6000–ON - Advertising VXLAN Access Ports to Controller

You must configure feature VXLAN to configure vxlan-instance.
2. vxlan-instance
CONFIGURATION mode
vxlan-instance instance ID
The platform supports only the instance ID 1 in the initial release.
3. controller
VxLAN INSTANCE mode
controller controller IDip address port port-number tcp|ptcp|pssl|ssl
The port number range is from 1 to 6632. The default port number is 6632. The default connection
type is ssl.
4. gateway-ip
VxLAN INSTANCE mode
gateway-ip IP address
5. max-back off (Optional)
VxLAN INSTANCE mode
max_backoff time
The range is from 1000-180000. The default value is 30000 milliseconds.
6. fail-mode (Optional)
VxLAN INSTANCE mode
fail-mode secure
If the local VTEP loses connectivity with the controller, it will delete all its database and hardware
flows/resources.
7. no shut
VxLAN INSTANCE mode
Advertising VXLAN Access Ports to Controller
To advertise the access ports to the controller, use the following command.
In INTERFACE mode, vxlan-instance command configures a VXLAN-Access Port into a VXLAN-
instance.
INTERFACE mode
vxlan-instance
Examples of the show vxlan-instance Command
Dell#show vxlan vxlan-instance 1
Instance : 1
Admin State : enabled
Management IP : 192.168.200.200
Gateway IP : 3.3.3.3
MAX Backoff : 30000
Controller 1 : 192.168.122.6:6632 ssl (connected)
982
Virtual Extensible LAN (VXLAN)