Dell S6000–ON - Copying the Startup-Config Files to the Server Via TFTP; Copy a Binary File to the Startup-Configuration

copyUserName.index s server-login-id copyUserPassword.index s server-login-
password
• precede server-ip-address by the keyword a.
• precede the values for copyUsername and copyUserPassword by the keyword s.
Example of Copying Configuration Files via FTP From a UNIX Machine
> snmpset -v 2c -c private -m ./f10-copy-config.mib 10.10.10.10 copySrcFileType.
110 i 2
copyDestFileName.110 s /home/startup-config copyDestFileLocation.110 i 4
copyServerAddress.110
a 11.11.11.11 copyUserName.110 s mylogin copyUserPassword.110 s mypass
FTOS-COPY-CONFIG-MIB::copySrcFileType.110 = INTEGER: runningConfig(2)
FTOS-COPY-CONFIG-MIB::copyDestFileName.110 = STRING: /home/startup-config
FTOS-COPY-CONFIG-MIB::copyDestFileLocation.110 = INTEGER: ftp(4)
FTOS-COPY-CONFIG-MIB::copyServerAddress.110 = IpAddress: 11.11.11.11
FTOS-COPY-CONFIG-MIB::copyUserName.110 = STRING: mylogin
FTOS-COPY-CONFIG-MIB::copyUserPassword.110 = STRING: mypass
Copying the Startup-Config Files to the Server via TFTP
To copy the startup-config to the server via TFTP from the UNIX machine, use the following command.
NOTE: Verify that the file exists and its permissions are set to 777. Specify the relative path to the
TFTP root directory.
• Copy the startup-config to the server via TFTP from the UNIX machine.
snmpset -v 2c -c public -m ./f10-copy-config.mib force10system-ip-address
copySrcFileType.index i 3 copyDestFileType.index i 1 copyDestFileName.index s
filepath/filename copyDestFileLocation.index i 3 copyServerAddress.index a
server-ip-address
Example of Copying Configuration Files via TFTP From a UNIX Machine
.snmpset -v 2c -c private -m ./f10-copy-config.mib 10.10.10.10
copySrcFileType.4 i 3
copyDestFileType.4 i 1
copyDestFileLocation.4 i 3
copyDestFileName.4 s /home/myfilename
copyServerAddress.4 a 11.11.11.11
Copy a Binary File to the Startup-Configuration
To copy a binary file from the server to the startup-configuration on the Dell Networking system via FTP,
use the following command.
• Copy a binary file from the server to the startup-configuration on the Dell Networking system via FTP.
snmpset -v 2c -c public -m ./f10-copy-config.mib force10system-ip-address
copySrcFileType.index i 1 copySrcFileLocation.index i 4 copySrcFileName.index
s filepath/filename copyDestFileType.index i 3 copyServerAddress.index a
server-ip-address copyUserName.index s server-login-id copyUserPassword.index
s server-login-password
Example of Copying a Binary File From the Server to the Startup-Configuration via FTP
> snmpset -v 2c -c private -m ./f10-copy-config.mib 10.10.10.10 copySrcFileType.
10 i 1
copySrcFileLocation.10 i 4 copyDestFileType.10 i 3 copySrcFileName.10 s /home/
Simple Network Management Protocol (SNMP)
853