Dell S6000–ON - Sample DCB Configuration

CONFIGURATION mode
Dell(conf)# dcb-policy buffer-threshold stack-unit all stack-ports all dcb-
policy-name
7. Assign the DCB policy to the DCB buffer threshold profile on interfaces. This setting takes
precedence over the default buffer-threshold setting.
INTERFACE mode (conf-if-te)
dcb-policy buffer-threshold buffer-threshold
8. Configuring Global total buffer size on stack ports.
CONFIGURATION mode
dcb pfc-total-buffer-size buffer-size stack-unit all port-set {port-pipe |
all}
Port-set number range is from 0 to 3.
Sample DCB Configuration
The following shows examples of using PFC and ETS to manage your data center traffic.
In the following example:
• Incoming SAN traffic is configured for priority-based flow control.
• Outbound LAN, IPC, and SAN traffic is mapped into three ETS priority groups and configured for
enhanced traffic selection (bandwidth allocation and scheduling).
• One lossless queue is used.
Data Center Bridging (DCB)
283