Configure GVRP
To begin, enable GVRP.
To facilitate GVRP communications, enable GVRP globally on each switch. Then, GVRP configuration is
per interface on a switch-by-switch basis. Enable GVRP on each port that connects to a switch where
you want GVRP information exchanged. In the following example, GVRP is configured on VLAN trunk
ports.
Figure 39. Global GVRP Configuration Example
Basic GVRP configuration is a two-step process:
1. Enabling GVRP Globally
2. Enabling GVRP on a Layer 2 Interface
Related Configuration Tasks
• Configure GVRP Registration
• Configure a GARP Timer
350
GARP VLAN Registration Protocol (GVRP)
To Next Page
Loading...
