Fields Description
is on, PFC advertisements are enabled to be sent
and received from peers; received PFC
configuration takes effect. The admin operational
status for a DCBx exchange of PFC configuration is
enabled or disabled.
Remote is enabled; Priority list Remote Willing
Status is enabled
Operational status (enabled or disabled) of peer
device for DCBx exchange of PFC configuration
with a list of the configured PFC priorities. Willing
status of peer device for DCBx exchange (Willing
bit received in PFC TLV): enabled or disabled.
Local is enabled DCBx operational status (enabled or disabled) with
a list of the configured PFC priorities
Operational status (local port) DCBx operational status (enabled or disabled) with
a list of the configured PFC priorities.
Port state for current operational PFC
configuration:
• Init: Local PFC configuration parameters were
exchanged with peer.
• Recommend: Remote PFC configuration
parameters were received from peer.
• Internally propagated: PFC configuration
parameters were received from configuration
source.
PFC DCBx Oper status Operational status for exchange of PFC
configuration on local port: match (up) or
mismatch (down).
State Machine Type Type of state machine used for DCBx exchanges of
PFC parameters:
• Feature: for legacy DCBx versions
• Symmetric: for an IEEE version
TLV Tx Status Status of PFC TLV advertisements: enabled or
disabled.
PFC Link Delay Link delay (in quanta) used to pause specified
priority traffic.
Application Priority TLV: FCOE TLV Tx Status Status of FCoE advertisements in application
priority TLVs from local DCBx port: enabled or
disabled.
Application Priority TLV: ISCSI TLV Tx Status Status of ISCSI advertisements in application
priority TLVs from local DCBx port: enabled or
disabled.
Application Priority TLV: Local FCOE Priority Map Priority bitmap used by local DCBx port in FCoE
advertisements in application priority TLVs.
Data Center Bridging (DCB)
273
To Next Page
Loading...
