EasyManua.ls Logo

Dell S6000–ON - Page 398

Dell S6000–ON
1080 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Commas
Add Ranges
Create a Single-Range
The following is an example of a single range.
Example of the interface range Command (Single Range)
Dell(config)# interface range tengigabitethernet 1/1/1 - 1/2/3
Dell(config-if-range-te-1/1/1-1/2/3)# no shutdown
Dell(config-if-range-te-1/1/1-1/2/3)#
Create a Multiple-Range
The following is an example of multiple range.
Example of the interface range Command (Multiple Ranges)
Dell(conf)#interface range tengigabitethernet 1/5/1 - 1/10/1 ,
tengigabitethernet 1/1/1 , vlan 1
Dell(conf-if-range-te-1/1/1,te-1/5-1/10/1,vl-1)#
Exclude Duplicate Entries
The following is an example showing how duplicate entries are omitted from the interface-range prompt.
Example of the Interface-Range Prompt for Duplicate Interfaces
Dell(conf)#interface range vlan 1 , vlan 1 , vlan 3 , vlan 3
Dell(conf-if-range-vl-1,vl-3)#
Dell(conf)#interface range tengigabitethernet 2/1/1 - 2/3/2 ,
tengigabitethernet 2/1/1 - 2/3/2 , tengigab 2/1/1 - 2/3/2
Dell(conf-if-range-te-2/1/1-2/3/2)#
Exclude a Smaller Port Range
The following is an example show how the smaller of two port ranges is omitted in the interface-range
prompt.
Example of the Interface-Range Prompt for Multiple Port Ranges
Dell(conf)#interface range tengigabitethernet 2/1/1 - 2/4/2 , tengigab 2/1/1 -
2/2/2
Dell(conf-if-range-te-2/1/1-2/4/2)#
Overlap Port Ranges
The following is an example showing how the interface-range prompt extends a port range from the
smallest start port number to the largest end port number when port ranges overlap. handles overlapping
port ranges.
Example of the Interface-Range Prompt for Overlapping Port Ranges
Dell(conf)#interface range tengigabitethernet 2/1/1 - 2/3/3 , te 2/1/1 - 2/5/1
Dell(conf-if-range-te-2/1/1-2/5/1)#
Commas
The following is an example of how to use commas to add different interface types to the range, enabling
all TenGigabitEthernet interfaces in the range 5/1/1 to 5/4/4 and both TenGigabitEthernet interfaces 1/1/1
and 1/1/2.
Example of Adding Interface Ranges
Dell(config-if)# interface range tengigabitethernet 5/1/1 - 5/4/4,
tengigabitethernet 1/1/1 - 1/1/2
Dell(config-if-range-te-5/1/1-5/4/4)# no shutdown
398
Interfaces

Table of Contents

Other manuals for Dell S6000–ON

Related product manuals