DVP15MC11T Operation Manual
Thank you for purchasing DVP15MC11T motion controller which is created on the basis of motion control and
we are providing you with a high-end motion control system.
This manual describes the product specifications, functions, system architecture, installation, wiring,
execution principle, logic instructions and motion control instructions, trouble-shooting, communication
protocols, homing modes and other relevant information.
Make sure that you have well known about the motion control system configuration and product operation
before using DVP15MC11T.
1.1 Explanation of Symbols in This Manual
Precautions before operation
Before operation, please read relevant safety instructions carefully so as to prevent an injury to personnel and
damage to products.
It indicates the highly potential hazards. It is possible to cause a severe injury or even
fatal harm to personnel if you do not follow the instructions.
It indicates the potential hazards. It is possible to cause a minor injury or even fatal
harm to personnel if you do not follow the instructions.
It indicates much attention should be paid. An unexpected result may occur if you do
not follow the instructions.
1.2 Revision History
Version Revision Release Date
1
st
The first version was published. May 30, 2018
1-2
To Next Page
Loading...
