Delta Electronics DVP15MC11T

DVP15MC11T Operation Manual
_4
4.1 System Constitution
A multi-layer industrial network can be built by means of DVP15MC11T. By using DVP15MC11T, the
network can consist of top-layer Ethernet, middle-layer CANopen and Profibus bus as well as bottom-layer
RS-485 bus which supports Modbus as follows.
The figure above illustrates the peripheral devices which are connected to various ports of DVP15MC11T in
the entire system. Refer to chapter 6 for details on the functions of communication ports.
4.2 Power Supply
Delta power modules are recommended as the power supply for DVP15MC11T. The information of Delta
power modules is shown in the following table.
No.
Module
name
Phase
Input
voltage
Output
voltage
Power
Output
current
International
Standard
1 DVPPS02
Single
phase
85~264VAC 24VDC
48W 2A
2 DVPPS05 120W 5A
4.3 Left-side Extension
4.3.1 Connectable Left-side Extension Module
Max. 8 high-speed extension modules can be connected to the left side of DVP15MC11T and the
connectable modules are listed in the following table.
No. Module name Module type Description
1
DVP04AD-SL
Analog module
Analog input
2
DVP04DA-SL
Analog module
Analog output
3
DVPPF02-SL
Network module Profibus communication
4-2