Delta AS Series Manual

Version
Revision
Date
7
th
1. Chapter 1: Added model information including AS02PU-
A, AS04PU- A , AS02HC- A, AS04SIL- A and AS- FPFN02
2. Chapter 2: Updated section 2.2.1 specification, 2.2.4
and 2.2.5 CR table, and 2.4 adding a new error code.
3. Chapter 3: Updated section 3.2.4 CR table and 3.4
adding a new error code.
4. Chapter 4: Updated section 4.2 specification, 4.2.4 CR
table and 4.4 adding a new error code.
5. Chapter 5: Updated section 5.2 specification, 5.2.4 and
5.2.5 CR table, and 5.4 adding a new error code.
6. Chapter 6: Updated section 6.2.4 and 6.2.5 CR table.
Added DMPID instruction supporting firmware versions
and section 6.4 adding a new error code.
7. Chapter 7: Updated section 7.2.4 and 7.2.5 CR table
and 7.5 adding a new error code.
8. Chapter 8: Added a new error code in section 8.7.2.2.
9. Chapter 9: Updated AS- F2AD specifications in s ections
9.2.4 and 9.2.5. Deleted SM1110 and SR1540 in
section 9.2.7. Added AS- FPFN02 information in
sections 9.2.8 and 9.3.5.
10. Chapter 11: New chapter introducing positioning
modules AS02PU- A and AS04PU-A.
2019/11/29
8
th
1. Chapter 1: Updated section 1.1 to include software
information for new AX series PLC, updated AS02HC- A
specifications and added AS-FOPC02 information.
Added an installation note in section 1.3.4.
2. Chapter 2: New chapter introducing digital input/output
modules.
3. Chapter 3 – 7: Added DIADesigner+ and Hardware
Configuration information.
4. Chapter 8: Updated CR#120 default value and input
values 100 to 105 of CR200 command set in section
8.2.4.
5. Chapter 9 : Added AS- FPEN02 and AS04SIL- A
information, added LED indicator information of
EtherNet/IP in section 9.4.2, and added error LED
indicator information of AS00SCM- A in section 9.7.2.2.
6. Chapter 10: Updated software images in section 10.2.7
and 10.2.7.2, updated section 10.2.7.7, added AS-
FPFN02 installed on AS00SCM- A information in section
10.2.8, added AS-FOPC02 product information in
sections 10.2.9 and 10.3.6, updated LED indicator
information of AS- FEN02 in section 10.3.4.
7. Chapter 12: Updated response time and input isolation
specifications in section 12.2.1.
8. Chapter 13: New chapter introducing IO link
communication module, AS04SIL- A.
9. Chapter 14: New chapter introducing high speed
counter modules AS02PU and AS04PU.
4/28/2020

Delta AS Series Specifications

General

Brand	Delta
Model	AS Series
Category	Control Unit
Language	English