Delta CMM-EIP02 - Network Installation

VFD EtherNet/IP Option Card
Option Card Application Manual
23
3.9 Network Installation
Connect CMM-EIP02 to Ethernet hub with CAT-5e twisted-pair cable. CMM-EIP02 supports auto MDI
/ MDIX function, so you do not need to use crossover cable when using CAT-5e twisted-pair cable.
RJ45 Diagram PIN No. Definition Description
Socket
1 Tx+ Positive pole for data transmission
2 Tx- Negative pole for data transmission
3 Rx+ Positive pole for data reception
4 -- N / C
5 -- N / C
6 Rx- Negative pole for data reception
7 -- N / C
8 -- N / C
Depending on the number of communication ports for EtherNet/IP, there are two types of network
communication port devices: single-port and dual-port.
Drive Series Option Card Number of Ports
M300
CMM-EIP02 1
CMM-EIP03 2
C2000
CMC-EIP01 1
CMC-EIP02 2