VFD EtherNet/IP Option Card
Option Card Application Manual
32
4.3.1 Network Parameter Setting for Option Card
1. Open DCISoft, select Ethernet as Communication Type, and then select the correct
Ethernet card.
2. Click Broadcast icon to search CMM-EIP02. Note that your computer must be in the same
subnetwork as the option card.
3. You can view the drive station number and device name in Overview page. There may be
multiple CMM-EIP02 on the network. To quickly locate the control device you need, set the
device name in Basic page.
To Next Page
Loading...
