DVP-ES3/EX3/SV3/SX3 Series Hardware and Operation Manual
6-36
After you double-click the item, a item monitoring window appears. You can add items to be monitored to the
window. To add an item to the window, double-click the blank space in the monitoring table, type a device
name, type a start address, and the number of devices to be monitored in the
Device Monitor Input
dialog
box. You can add up to 100 items to a monitoring table.
Press Insert on the keyboard to switch between inserting and replacing an item in the monitoring table. The
selected mode displays in the status bar in ISPSoft.
If you select insert mode, the new item is added above the selected item in the monitoring table. If you select
replacement mode, the new item overwrites the selected item in the monitoring table.
To hide certain columns in the monitoring table, right-click the monitoring table, point to
Set the Fields
, and
clear certain items. After you clear an item, the corresponding column disappears.
To Next Page
Loading...
Need help?
General
