Delta DVP-ES3 Series Hardware Manual

Chapter 9 Ethernet Specification and Operation
9-39
9_
Error
Code
(HEX)
Description
Solutions
0129
The configuration path in the
EDS file is incorrect.
 Check if the product information and the EDS file matched.
 Reload the EDS file.
 Contact the adapter manufacturer to obtain the correct EDS file.
012D
Incorrect Consumed Tag
parameter
 Check if the parameters in the Consumed tag are set correctly.
012E
Incorrect Produced Tag
parameter
 Check if the parameters in the Produced tag are set correctly.
0132
The EDS file does not support
Null forward open.
 Check if the product information and the EDS file matched.
 Reload the EDS file.
 Contact the adapter manufacturer to obtain the correct EDS file.
0203 I/O connection timeout
 There has been a disconnection or no response from the server
after establishing a connection.
 Check the network connection status.
 Check if the Adapter is working properly.
 Increase the RPI value.
0204
Communication timeout when
establishing I/O connections
 Connection establishment failed, adapter did not respond.
 Check if the IP address is correct.
 Check if there is an IP address conflict.
 Check if the device to be connected supports EtherNet/IP
Adapter.
 Check if the network cable connection is normal.
 Check if the Adapter is working properly.
0302
The network configuration
exceeds the product's PPS
specification.
 Check the IO connection specifications of the Scanner and
Adapter.
 Increase the RPI value or reduce the number of connections.
0315
Adapter input/output instance
parameter setting error
 Check if the product information and the EDS file matched.
 Reload the EDS file.
 Contact the adapter manufacturer to obtain the correct EDS file.

Delta DVP-ES3 Series Specifications

General

Brand	Delta
Model	DVP-ES3 Series
Category	Controller
Language	English