Delta DVP-ES3 Series

DVP-ES3/EX3/SV3/SX3 Series Hardware and Operation Manual
9-58
_9
*1 Interface Status
Status Description
0 The Interface Configuration attribute has not been configured.
1
The Interface Configuration attribute contains valid configuration obtained from BOOTP, DHCP or non-
volatile memory.
2 The Interface Configuration attribute contains valid configuration obtained from hardware.
*2 Interface Capability Flags
Bit Description
0 BOOTP Client
1 DNS Client
2 DHCP Client
3 DHCP-DNS Update
4 Configuration Settable
5 Hardware Configurable
6 Interface Configuration Change Requires Reset
*3 Interface Configuration Control
Status Description
0
The device uses the interface configuration values previously stored (for example, in non-volatile
memory or through hardware switches).
1 The device obtains its interface configuration values through BOOTP.
2 The device obtains its interface configuration values through DHCP on start-up.