Delta DVP-ES3 Series Hardware Manual

DVP-ES3/EX3/SV3/SX3 Series Hardware and Operation Manual
14-22
_14
Error
code
Description
CPU
status
ERROR LED indicator status
ON
Blinking
fast
Blinking
normally
Blinking
slowly
OFF
7034
The device length of the communication data in
Ethernet exceeds the limit.
Continue V
7037
The device checksum for the communication serial
port of Ethernet is incorrect.
Continue V
7041
The device communication function code in USB is
incorrect.
Continue V
7042
The device communication address used in USB is
incorrect.
Continue V
7043
The device used in USB exceeds the device range.
Continue
V
7044
The device
length of the communication data in
USB exceeds the limit.
Continue V
7047
The device checksum for the communication serial
port of USB is incorrect.
Continue V
7203
Invalid communication function code
Continue
V
8105
The contents of the
downloaded program are
incorrect.
The program syntax is incorrect.
Continue V
8106
The contents of the downloaded program are
incorrect.
The length of the execution code exceeds the limit.
Continue V
8107
The contents of the downloaded
program are
incorrect.
The length of the source code exceeds the limit.
Continue V
8000
-
8FFF
Errors occur between software and PLC. Continue V
C000
-
CFFF
The program syntax is incorrect. Stop V

Delta DVP-ES3 Series Specifications

General

Brand	Delta
Model	DVP-ES3 Series
Category	Controller
Language	English