Chapter 2 Specifications and System Configuration
2-9
Electrical specifications for the outputs on DVP-EX3 Series.
Model
22EX300R 36EX300R 22EX300T 36EX300T 28EX300MT
Number of
8 16 8 16 12
Removable terminal blocks
Output form Relay Transistor
Y0+~Y3+/Y0-~Y3-: Differential;
Y4~Y7 /Y10-Y13: Transistor
Voltage
10~250 VA
C; 5~30 VDC
5~30 VDC
Y0+~Y3+/Y0-~Y3-:5VDC;
Max. inrush
current
–
T
ransistor-T (sinking): 0.8A
Tested when Ta = 25
o
C, VDS = 30 VDC, and
Maximum
load
Resis
tance
2A/output, 5A/
COM 0.5A/output, 4A/COM*2
Y0+~Y3+/Y0-~Y3-:
20mA/
+ and – are grouped, e.g. Y0+
and Y0-);
Y4~Y7 /Y10-Y13: 0.5A/output;
4A/COM*2
Induc
Life cycle curve*
3
N/A
3000 VAC 500 VAC
Switching
frequency
*1
≦1Hz
Y0~
Y7:200kHz
Y10~Y17 ≦1kHz
Y0+~Y3+/Y0-~Y3- : 4MHz ;
Y4~Y7: 200kHz
Response
time
OFF→
ON
Around 10ms
Y0~Y7:1.5 μs
Y10~Y17:100 μs
Y0+~Y3+/Y0-~Y3-:0.125 μs;
Y4~Y7 : 1.5 μs
ON→
OFF
Y0~
Y7:1.5 μs
Y10~Y17:100 μs
Y0+~Y3+/Y0-~Y3-:0.125 μs;
Y4~Y7 : 1.5 μs
Analog output
2 (applicable for 36EX3/28EX3)
Analog output
conversion
4
2 ms / channel (36EX3/28EX3)
Analog output
12-bit (applicable to 36EX3/28EX3)
Analog output
-10V~10V (voltage mode) / 0~20mA (current mode) (applicable to 36EX3/28EX3)