Denon AVR-2309CI

ENGLISH
[Video)
[HOM I)
Cause Countermeasure
Symptom Cause
Countermeasure Page
HDMI audio ·The "Manual Setup" - "HDMI
• Set to "Amp"
32
signals are not Setup" - "Audio" setting is set
output from
to"TV"
speakers.
No picture
•
The connections to the HDMI
• Check the connections.
12
appears connectors are faulty.
with HDMI
• HDMI input setting
is improper.
• Check the HDMI input setting.
42
connections.
•
The monitor is not compatible
• Connect
a
monitor that
is 12
with copyright protection compatible with copyright
(HDCP)
protection (HDCP).
• The HDMI format of the player
• Match the HDMI format of the
12
and monitor do not match.
player
and monitor.
No sound
is • The "Manual Setup" - "HDMI
• Set to "TV':
32
output from
Setup" - "Audio" setting
is set to
the monitor
"Amp':
connected
with HDMI
connections.
When performing
• HDMI's
CEC
function
is
• Set
"Manual
Setup"
-
"HDMI
32
the following operating. Setup"
-
"HDMI
Control"
to
operations
on a "OFF':
connected device, When
you only want to operate
AVR-2309CI
the power on/off
each device, set
has the same "Power Off Control" to "OFF'.'
operations.
· Power ON/OFF
· Switching audio
output devices
· Adjust volume
· Switch input
source
15
9
46
9
36
36
36
36
Page
12 - 16
• Cancel the PURE DIRECT mode.
• High definition (1080i/720p)
and
progressive (480p/576p) video
signals are not down-converted.
Set the player
to interlace
(480i/576i) signals.
• This
is not a malfunction. Most
movie software includes copy
prevention signals
and cannot be
copied.
• The video conversion function
does not work for the
REC
OUT connectors. Match the
input source
and recorder
connections.
• When viewing HDMI or
component video signals
via
the AVR-2309CI, the on-screen
display appears when the
MENU button on the main unit or
the A.MENU button on the main
remote control unit.
• When only HDMI or component
video signals
are input to the
AVR-2309CI, the characters of
the on-screen display
are not
displayed over the picture
• Set "Manual Setup" - "Option
Setup" - "On-Screen Display" -
"Text" to
"ON':
• Set "Manual Setup" - "Option
Setup" - "On-Screen Display" -
"Master Volume" to
"ON':
• Set when "Manual Setup" -
"On-Screen Display" - "Tuner
Information"is not "OFF':
• Set when "Manual Setup" -
"On-Screen Display" - "
iPod
Information" is not "OFF'.'
• The connections between the • Check the connections.
AVR-2309CI and monitor
are
faulty.
•
The monitor's input setting is • Set properly.
wrong.
•
PURE DIRECT mode is set.
•
The player is connected using the
component input connectors, the
monitor
is connected using the
video (yellow) or S-Video output
connectors.
• Input source does not match
recorder's video connection
connector (video or S-Video).
• The operation content display
is
"OFF'.'
• The main volume display is
"OFF"
• The display during tuner operation
is "OFF"
• The display during
iPod operation
is "OFF':
Symptom
No picture
appears.
On-screen
display is not
shown.
DVDs cannot be
copied on a VCR.
Picture cannot be
recorded.
84