EasyManua.ls Logo

Denso BHT-8000 - Page 101

Denso BHT-8000
219 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
88
If you select one of "1:DESTINATION IP" through "5:COUNT" items
and press the ENT key, then the entry box of that item becomes read
y
to accept entry and a cursor appears. Enter the desired value b
y
using the numerical keys and then press the ENT key.
In the entry mode, to delete a single character, press the BS key. To
delete the whole entry you made, press the C key.
If "6:SEND TYPE" is selected, use the F7 and F8 keys to choose the
desired type.
To return to the TEST PING menu, press the C key when any item is
highlighted.
Entry Range for DATA SIZE, INTERVAL, TIMEOUT, and COUNT
Item Allowable entry range Initial value
DATA SIZE 4 to 1472 56
INTERVAL 0 to 65535 10
TIMEOUT 0 to 65535 10
COUNT 0* to 65535 4
* Specification of zero (0) will set the number of echo requests to be sent to "infinite," keeping sending
echo requests (until PING is aborted).
If you specify a value out of the allowable entry range listed above, the nearest value within the range will
automatically apply.

Table of Contents

Other manuals for Denso BHT-8000

Related product manuals