Deprag AST6 User Manual

73
14.1.3 Main Controller
Number Meaning Troubleshooting
201 Fieldbus not available!
Check that the fieldbus module is installed and
mounted tightly. If the fieldbus module no longer
needs to be used, deactivate the fieldbus in the
settings.
202
Software versions of power unit and main
unit are not compatible!
Please contact the DEPRAG Service Department.
203
Screwdriver and controller are not
compatible.
Ensure that you have fitted an installation
screwdriver to the AST6.
204 Lost settings, default values will be loaded. Check the settings and adjust them if necessary.
205 Error in the data storage
206 Error in the communication with power unit
Please contact DEPRAG Service.
207 not used -
208 No connection to fieldbus!
Switch off the AST6 and then switch it on again. If
the fault remains, please contact the DEPRAG
Service Department.
209 SSC driver could not be loaded! Switch off the AST6 and then switch it on again.
Table 19: System errors regarding the main controller
14.1.4 Communication
Number Meaning Troubleshooting
301 No connection
302 General fault
303 Checksum error
304 Module not found
305 Unknown command
306 Timeout
Switch off the AST6 and then switch it on again. If
the fault remains, please contact the DEPRAG
Service Department.
Table 20: System errors regarding the communication

Deprag AST6 Specifications

General

Brand	Deprag
Model	AST6
Category	Controller
Language	English