8
4 Scope of Delivery
Check that the shipment is complete and that there have been no damages in transit.
Quantity Designation Part no.
1 AST6 Sequence controller 428001 A
1 Power unit 204106
1 Quick-Start instructions of AST6 with 320E... 013738
1 Safety Instruction 016000
5 Short Description
The sequence controller AST6 is a sequence controller with integrated performance
electronics to operate DEPRAG MICROMAT
®
–EC screwdrivers (stationary) of the series
320E12 and 320E19. It has a E/A interface and an Ethernet connection and as well as
optional via one fieldbus interface.
The sequence controller AST6 can be operated via the web interface as well as via the
touch display. The web interface and the display on the touch display are available in
several languages to select from.
100 different screwing programs can be created. For this, several screwing samples and
commands are available.
The screwing applications can be analyzed and evaluated using the statistic and curve
representations.
Extensive diagnosis possibilities help detect possible faults in the screw driving sequence,
at the screwdriver or at the controller.
To Next Page
Loading...
