Blitz-DT9 User Manual
- 12 -
2. Click the Select button, set the path of this upgrade program in the pop-up
dialog.
3. Power on the RXC9M receiver and connect the receiver to computer via the
USB cable
If the computer cannot recognize the RXC9M when it is connected, you need
to install the RXC9M device driver first. Installation method: (1) Right-click
Computer, select Properties →(2) Select Device Manager, found RXC9M
in the list → (3) Right-click to select Update Driver Software → (4) In the
pop-up dialog box, select Browse my computer for driver software → (5)
Select the file path where the RXC9M device driver is located and click Next.
4. Ensure the information (firmware and product) is right and then click Upgrade
to complete the firmware upgrade.
To Next Page
Loading...
