DETRUM Blitz-DT9 - Import All Model; Fail Safe [Fail Safe]

Blitz-DT9 User Manual
- 27 -
export and save the file to the SD card.
Import All Model
You can import all models from the SD card.
1. In the Model Set menu, roll the scroll wheel to select Import & Export, press
the scroll wheel. Then roll the scroll wheel to select Import All Model, and
then press the scroll wheel.
Import All Model
Name：MODEL000.DMD
2. Roll the scroll wheel to select the model file, then press the scroll wheel to
import the file to the transmitter.
Fail Safe [Fail Safe]
If there is signal interference to the transmitter, or the receiver does not receive a
valid RF signal from the transmitter, this function moves the servos to predefined
positions, to avoid a crash.
WARNING:
 For safety, always set the failsafe function before each flying session.
Especially set the throttle channel fail safe function, set an appropriate value
for the throttle channel according to the model type.
 Remember to implement the failsafe setting after completing the aircraft
settings.
Setting Method:
1. In the Model Set menu, roll the scroll wheel to select Fail Safe, and then
press the scroll wheel to enter the setting interface.
Fail Safe
1/9
1.AIL：
2.ELE：
3.THR：
4.RUD：
5.GEAR：