Blitz-DT9 User Manual
- 62 -
CAUTION: Ensure that connect the ESC to transmitter first. And then power
on the ESC. Or the connection fails.
4. Roll the scroll wheel to select programmable item. Press and then roll the
scroll wheel to set the value. After that, press the scroll wheel to save the
value.
5. After the setting is completed, roll the scroll wheel to select Program and
press the scroll wheel to save all the values.
ESC Set
7/7
3.Cut Off Type：
4.Cut Off Voltage：
5.Start Mode：
6.Timing Mode：
7.Program
Middle
Normal
Middle
Soft-Cut
To Next Page
Loading...
