GAVIN-8C Instruction Manual
- 37 -
operation in response to throttle stick operation when the helicopter is in
NORM flight mode.
ACR THR Curve (Acrobatic Throttle Curve): It is used to adjust throttle servo
operation in response to throttle stick operation when the helicopter is in ACR
flight mode.
NOTE: The introductions for NORM and ACR, please refer to Flight Mode
(Page 15).
Setting Method:
1. In the Heli Parameter menu, press UP or DOWN key to select THR Curve,
and then press ENT key to enter the NORM THR Curve setting interface.
Continue to press ENT key to enter ACR THR Curve setting interface.
NORM THR Curve ENT
EPA: +100
EXP: 0
LEVEL
CUSTOM
1： 0.0
2： 12.5
3： 25.0
4： 37.5
5： 50.0
7： 75.0
6： 62.5
ACR THR Curve ENT
EPA: +100
EXP: 0
LEVEL
CUSTOM
1： 0.0
2： 12.5
3： 25.0
4： 37.5
5： 50.0
7： 75.0
6： 62.5
2. Press UP or DOWN key to select the setting item, and then press R/+ or L/-
key to set the value of the item.
For the descriptions of each parameter, please refer to Stick Curve [Stick
Curve] (Page 19).
After setting the helicopter’s throttle curve, you can select the normal or acrobatic
throttle curve by using acrobatic flight switch.
To Next Page
Loading...
