DETRUM GAVIN 8C - Model Set; Select Model [Model]; Edit Model Name [Name]; Fail Safe

- 45 -
Model Set
In the Model Set menu, you can edit a model, switch to another model, set the
model type, set the trainer function and fail safe function. GAVIN-8C can store a
maximum of 30 aircraft models.
After entering the main menu, press UP or DOWN key to select Model Set, and
then press ENT key to enter the Model Set interface.
Model Set
1/8
1. Model：
2.Name：
3.Type：
4.Trainer set
5.Fail Safe
01 Model
MODEL01
AIRPLANE
Select Model [Model]
This is used to select a model, enables you to access any of the 30 aircraft
models in the model list.
Setting Method:
1. In the Model Set menu, press UP or DOWN key to select Model, and then
press ENT key to enter the setting interface.
Select model
1/30
1. No.01Model
2.No.02Model
3.No.03Model
4.No.04Model
5.No.05Model
Name:MODEL01
Name:MODEL02
Name:MODEL03
Name:MODEL04
Name:MODEL05
2. Press UP or DOWN key to select the model, and then press ENT key to
confirm the selection.
Edit Model Name [Name]
The model name is used to display in the main screen. Users can edit the model