DETRUM GAVIN 8C - Timer Set [Timer 1;2 Set]

GAVIN-8C Instruction Manual
- 50 -
AILERON
1/2
1. Set：
Fail Safe
2.
0
4. Set the value to desired position.
Values for each channel: -120~120. The default values for each channel are 0,
0, -100, 0, 0, 0, 0, and 0.
Timer Set [Timer 1/2 Set]
This transmitter incorporates two timer systems which are displayed on the main
screen. Take the timer 1 setting method as an example.
Setting Method:
1. Enter the timer set interface by one of the following ways.
 On the main screen, press UP key to enter Timer 1 Set interface directly, or
press DOWN key to enter Timer 2 Set setting interface directly.
 In the Model Set menu, press UP or DOWN key to select Timer 1 Set/ Timer
2 Set, and then press ENT key to enter the setting interface.
Timer 1 Set
1/5
1. Type：
OFF
2.Control SW：
3.THR Position：
4.Timer(min)：
5. (sec)：
0
0
-90
THR
2. Press UP or DOWN key to select Type, and then press R/+ or L/- key to set
the timer type.
Values:
 OFF: This timer is disabled. You do not need to set the following items
when OFF is selected.