DETRUM GAVIN 8C - Pitch Curve [PIT Curve]

GAVIN-8C Instruction Manual
- 38 -
Pitch Curve [PIT Curve]
It is used to adjust pitch operation in response to throttle stick operation. The
servo position can be set independently for a maximum of 9 point positions.
You can set pitch curve for the HLD (hold), NORM (normal) and ACR (acrobatic)
flight mode of helicopter respectively.
 HLD PIT Curve (Hold Pitch Curve): It is used to adjust pitch operation in
response to throttle stick operation when the helicopter is in HLD flight mode.
 NORM PIT Curve (Normal Pitch Curve): It is used to adjust pitch operation in
response to throttle stick operation when the helicopter is in NORM flight
mode.
 ACR PIT Curve (Acrobatic Pitch Curve): It is used to adjust pitch operation in
response to throttle stick operation when the helicopter is in ACR flight mode.
 Note: The introductions for HLD, NORM, and ACR, please refer to Flight
Mode (Page 15).
Setting Method:
1. In the Heli Parameter menu, press UP or DOWN key to select PIT Curve,
and then press ENT key to enter the HLD PIT Curve setting interface.
Continue to press ENT key to enter NORM PIT Curve and ACR PIT Curve
setting interface.
HLD PIT Curve ENT
EPA: +100
EXP: 0
LEVEL
CUSTOM
1： 0.0
2： 12.5
3： 25.0
4： 37.5
5： 50.0
7： 75.0
6： 62.5
NORM PIT Curve ENT
EPA: +100
EXP: 0
LEVEL
CUSTOM
1： 0.0
2： 12.5
3： 25.0
4： 37.5
5： 50.0
7： 75.0
6： 62.5