DETRUM GAVIN 8C - Volume [Volume]; Key Tone [Key Tone]; Back-Light Brightness [Brightness]

GAVIN-8C Instruction Manual
- 55 -
 If the throttle stick position to be changed when changing the stick mode, the
throttle stick and elevator stick location requires changing. For details, please
refer to Change the Location of Throttle Stick (Page 13).
 Be sure to calibrate both stick gimbals after changing the stick mode. For
details, please refer to Calibration [Calibration] (Page 53).
Volume [Volume]
It is used to adjust the system volume, including key volume, switching on
volume, and the volume while entering the submenu.
Values: 0~10. You may disable the key sound by changing the volume to 0. The
larger the value is, the greater the sound volume is.
Setting Method:
In the System Set menu, press UP or DOWN key to select Volume, and then
press R/+ or L/- key to set the volume.
Key Tone [Key Tone]
It is possible to change to tone for the keys.
Values: 0~30.
Setting Method:
In the System Set menu, press UP or DOWN key to select Key Tone, and then
press R/+ or L/- key to set the tone.
Back-light Brightness [Brightness]
It is used to adjust the back-light brightness.
Values: 0~10. You may shut off the back-light by changing the brightness to 0.
The larger the value is, the brighter the LCD screen displays.
Setting Method:
In the System Set menu, press UP or DOWN key to select Brightness, and then
press R/+ or L/- key to set the value.