GAVIN-8C Instruction Manual
- 56 -
Back-light Time [Bright Off]
It is used to adjust the back-light appearance time.
Values: NORM ON、10sec, 20sec, 30sec, 40sec, 50sec, and 60sec. When
NORM ON is selected, the back-light will be always on. When 10sec, 20sec,
30sec, 40sec, 50sec, or 60sec is selected, if there is no operation, the back-light
will be on for 10, 20, 30, 40, 50, or 60 seconds before automatically shutting off.
Setting Method:
In the System Set menu, press UP or DOWN key to select Bright Off, and then
press R/+ or L/- key to set the value.
Battery Type [Bat Type]
It is used to set the battery type used in the transmitter. This parameter must be
consistent with the actual battery type. Otherwise the transmitter cannot work
normally.
Setting Method:
1. In the System Set menu, press UP or DOWN key to select Bat Type.
2. Press R/+ or L/- key to set the battery type.
Values:
4S Alk: When 4 heavy-duty or alkaline AA batteries are connected, please
choose this value.
4S Ni-MH: When 4 Ni-Cd or Ni-MH AA batteries are connected, please
choose this value.
2S Li-Po: When 2S Li-Po battery is connected, please choose this value.
The default is 4S Alk.
About Information [About]
This indicates the current version of the transmitter's software and hardware.
In the System Set menu, press UP or DOWN key to select About, and then
press ENT key to check the version information.
To Previous Page
Loading...