DETRUM GAVIN 8C - Product Description; Box Contents; Transmitter; Specifications

- 5 -
Product Description
Box Contents
 GAVIN-8C Transmitter  DETRUM RXC8 Receiver
 Instruction Manual  USB Cable (optional)
 Simulator Convertor (optional)  9g Servo *4pcs (optional)
 NOTE: The set contents depend on the type of set.
Transmitter
Specifications
Parameters
GAVIN-8C Specifications
Channel
8-channel
Transmitting frequency
2.4GHz
Power supply
AA batteries 4*1.5V, Ni-MH batteries 4*1.2V,
2S Li-Po
Consuming current
Test mode: less than or equal to 120mA.
Operating mode: less than or equal to 230mA.
Output power
Test mode: 10mW. Operating mode: 100mW.
Output pulse
1000ms~2000ms (neutral 1500ms)
Features
 Adopting powerful wireless chips and extended with power amplifier (PA) and
low noise amplifier (LNA), can maximize the system output power while
reducing the system noise factor, thereby improving the signal coverage.
 The R/C system adopts 2.4GHz direct sequence spread spectrum (DSSS)
and multiple frequency-hopping spread spectrum (FHSS) technology, has
strong anti-interference capability, can support a stable remote control for
more than 1,000 meters on the ground and more than 1,600 meters in the air.
 It is suitable for airplane, helicopter, and multi-copter (multi-rotor).
 Fast response: The response time is only 2.6ms, even 8 channels it acts
synchronously.
 High section precision: By using the 4096 section precision sticks, you can
experience a smooth and exquisite flight operation.
 192*96 high-resolution dot-matrix LCD with easy-to-understand image and
menu, make it simple to use.