GAVIN-8C Instruction Manual
- 30 -
to set the delay value.
Values: 0~20. The default is 0. The larger the value is, more slowly the servo
speed changes.
Airplane Gyro
This menu is specifically designed to set the programmable items of the airplane
gyro. When working with the sport receiver which is integrated with 6-axis gyro,
this menu can be used to set its programmable items. For example, mode switch,
roll/pitch/yaw gain, roll/pitch offset, mounting direction, and wing type, etc.
Preconditions:
The transmitter and the sport receiver are well bound.
The transmitter and the sport receiver are powered on and connected.
Setting Method:
1. Assign a 3-position switch to AUX1 channel. This switch is used as the mode
switch for the sport receiver and used to change its flight modes.
(1) In the main menu, press UP or DOWN key to select Func Set, and then press
ENT key to enter the setting interface.
(2) Assign a 3-position switch to AUX1 channel and make sure this switch does
not have other functions.
Func Set
8/10
4.AIL D/R：
5.ELE D/R：
6.RUD D/R：
7.GEAR：
8.AUX1：
SF
SD
SA
SF
SF
NOTE: It is suggested to assign a 3-position switch to AUX1 channel. If you
assign a 2-position switch to AUX1 channel, you can only switch between
two flight modes during flying.
2. Enter the Airplane Gyro menu.
In the Airplane Parameter menu, press UP or DOWN key to select Airplane
Gyro, and then press ENT key to enter the setting interface.
To Next Page
Loading...
