User Manual DEV 2194
Copyright DEV Systemtechnik GmbH 2013-2017 47
5.5.4.3.2 .application.switchingControl
OID: .1.3.6.1.4.1.21035.41.2.2.0
Syntax: Integer32
Access: read-write
Description: .switchingControl is still present due to backward compatibility
reasons; i.e. it has no effect on the functionality of the device.
5.5.4.3.3 .application.simultaneousMode
OID: .1.3.6.1.4.1.21035.41.2.3.0
Syntax: INTEGER {simultaneous (1), individual (2)}
Access: read-write
Description: .simultaneousMode is not supported by this type of device;
i.e. it has no effect on the functionality of the device.
5.5.4.3.4 .application.numberOfSwitchGroups
OID: .1.3.6.1.4.1.21035.41.2.4.0
Syntax: Integer32
Access: read-only
Description: The number of switch groups within the device.
This type of device does not support switch groups, thus "0" is
returned.
Note:
This value is used to determine the maximum index of the following table:
5.5.4.3.5 .application.switchGroupTable
The table is required for products that feature switch groups, i.e. it is not relevant
for this type of device.
Therefore and due to the fact that for .numberOfSwitchGroups (please refer to
chapter 5.5.4.3.4) "0" is returned, the .switchGroupTable is not available.
5.5.4.3.5.1 .application.switchGroupTable.switchGroupEntry.swGroupIndex
OID: .1.3.6.1.4.1.21035.41.2.5.1.1.x
Syntax: Integer32 (1..32)
Access: not-accessible
Description: A unique value for each table entry ranging between "1" and the
number of entries (defined by .numberOfSwitchGroups, please
refer to chapter 5.5.4.3.4).
Not applicable for this type of device, since the .switchGroupTable
is not available.
5.5.4.3.5.2 .application.switchGroupTable.switchGroupEntry.swGroupMembers
OID: .1.3.6.1.4.1.21035.41.2.5.1.2.x
Syntax: OCTET STRING
Access: read-write
Description: A comma separated string containing the indices of the switch units
being member of the corresponding switch group.
Not applicable for this type of device, since the .switchGroupTable
is not available.
To Next Page
Loading...