User Manual DEV 2194
54 Copyright DEV Systemtechnik GmbH 2013-2017
5.5.4.3.9.22 .application.portTable.portEntry.poGainMode
OID: .1.3.6.1.4.1.21035.41.2.9.1.22.x
Syntax: INTEGER {notapplicable (0), manual (1), auto (2), mute (3)}
Access: read-write
Description: For this type of device, the gain mode can be read only, the only
possible value is
"1" manual: since the applied amplifiers provide manual gain
control functionality.
Note:
The values "0" (not applicable), "2" (auto), and "3" (mute) are not supported by
this type of device.
5.5.4.3.9.23 .application.portTable.portEntry.poOutputPowerSetpoint
OID: .1.3.6.1.4.1.21035.41.2.9.1.23.x
Syntax: Integer32
Access: read-write
Description: The automatic gain control set point.
For this type of device, "9999" is returned for all ports.
5.5.4.3.9.24 .application.portTable.portEntry.poHasInputPower
OID: .1.3.6.1.4.1.21035.41.2.9.1.24.x
Syntax: INTEGER {yes (1), no (2)}
Access: read-only
Description: The indication whether input power measurement capability is
provided or not.
.poHasInputPower is not implemented for this type of device.
5.5.4.3.9.25 .application.portTable.portEntry.poInputPower
OID: .1.3.6.1.4.1.21035.41.2.9.1.25.x
Syntax: Integer32
Access: read-only
Description: The measured input power in [dBm/10].
.poInputPower is not implemented for this type of device.
5.5.4.3.9.26 .application.portTable.portEntry.poInputPowerLimit
OID: .1.3.6.1.4.1.21035.41.2.9.1.26.x
Syntax: Integer32
Access: read-write
Description: The lower limit of the input power in [dBm/10].
.poInputPowerLimit is not implemented for this type of device.
To Next Page
Loading...