DEV 2194 - Application.porttable.portentry.pohasoutputpower; Application.porttable.portentry.pooutputpower; Application.porttable.portentry.podwdmchannelnumber; Application.antennastatus

User Manual DEV 2194
 Copyright DEV Systemtechnik GmbH 2013-2017 55
5.5.4.3.9.27 .application.portTable.portEntry.poHasOutputPower
OID: .1.3.6.1.4.1.21035.41.2.9.1.27.x
Syntax: INTEGER {yes (1), no (2)}
Access: read-only
Description: The indication whether output power measurement capability is
provided or not.
.poHasOutputPower is not implemented for this type of device.
5.5.4.3.9.28 .application.portTable.portEntry.poOutputPower
OID: .1.3.6.1.4.1.21035.41.2.9.1.28.x
Syntax: Integer32
Access: read-only
Description: The measured output power in [dBm/10].
.poOutputPower is not implemented for this type of device.
5.5.4.3.9.29 .application.portTable.portEntry.poDWDMChannelNumber
OID: .1.3.6.1.4.1.21035.41.2.9.1.29.x
Syntax: Integer32
Access: read-only
Description: The channel number for DWDM Tx modules.
.poDWDMChannelNumber is not implemented for this type of
device.
5.5.4.3.10 .application.antennaStatus
OID: .1.3.6.1.4.1.21035.41.2.10.0
Syntax: INTEGER {moving (1), rfok (2), rfnok (3), (0)}
Access: read-only
Description: The status of the motorized antenna.
.antennaStatus is not implemented for this type of device.
5.5.4.3.11 .application.antennaPosition
OID: .1.3.6.1.4.1.21035.41.2.11.0
Syntax: Integer32
Access: read-only
Description: The position of the motorized antenna.
.antennaPosition is not implemented for this type of device.
5.5.4.3.12 .application.numberOfMatrixOutputs
OID: .1.3.6.1.4.1.21035.41.2.12.0
Syntax: INTEGER (0..128)
Access: read-only
Description: The number of matrix output ports.
Not applicable for this type of device, thus "0" is returned.