DEV 2194 - Application.porttable.portentry.poenable; Application.porttable.portentry.potype; Application.porttable.portentry.pohasrfsense; Application.porttable.portentry.porfsense

User Manual DEV 2194
50  Copyright DEV Systemtechnik GmbH 2013-2017
5.5.4.3.9.2 .application.portTable.portEntry.poEnable
OID: .1.3.6.1.4.1.21035.41.2.9.1.2.x
Syntax: INTEGER {disabled (1), enabled (2)}
Access: read-write
Description: Error messages possibly caused by the port are (or can be) enabled
or disabled.
Note:
 The factory setting is "2" (enabled).
5.5.4.3.9.3 .application.portTable.portEntry.poType
OID: .1.3.6.1.4.1.21035.41.2.9.1.3.x
Syntax: Integer32 (0..255)
Access: read-only
Description: The functionality of the port.
For this type of device, "0" is returned for all ports.
5.5.4.3.9.4 .application.portTable.portEntry.poHasRfSense
OID: .1.3.6.1.4.1.21035.41.2.9.1.4.x
Syntax: INTEGER {yes (1), no (2)}
Access: read-only
Description: The indication whether RF level information is provided or not.
For this type of device, "1" (yes) is returned for all ports.
5.5.4.3.9.5 .application.portTable.portEntry.poRfSense
OID: .1.3.6.1.4.1.21035.41.2.9.1.5.x
Syntax: Integer32
Access: read-only
Description: The measured RF level in [dBm/10].
"9999" means not available or not present.
Example: "-129" ≡ -12.9 dBm
5.5.4.3.9.6 .application.portTable.portEntry.poRfLimit
OID: .1.3.6.1.4.1.21035.41.2.9.1.6.x
Syntax: Integer32
Access: read-write
Description: The RF threshold level in [dBm/10].
"9999" means not available or not present.
Note:
 The factory setting is stated in chapter 4.3.1.
5.5.4.3.9.7 .application.portTable.portEntry.poHasBias
OID: .1.3.6.1.4.1.21035.41.2.9.1.7.x
Syntax: INTEGER {yes (1), no (2)}
Access: read-only
Description: The indication whether bias (i.e. LNB power) is provided or not.
For this type of device, "1" (yes) is returned for all ports.