User Manual DEV 2194
56 ļ Copyright DEV Systemtechnik GmbH 2013-2017
5.5.4.3.13 .application.numberOfMatrixInputs
OID: .1.3.6.1.4.1.21035.41.2.13.0
Syntax: INTEGER (0..128)
Access: read-only
Description: The number of matrix input ports.
Not applicable for this type of device, thus "0" is returned.
5.5.4.3.14 .application.selectCrosspointSwitchingMode
OID: .1.3.6.1.4.1.21035.41.2.14.0
Syntax: INTEGER {tablemode (1), stringmode (2)}
Access: read-write
Description: The switching mode of the matrix.
.selectCrosspointSwitchingMode is not supported by this type of
device; i.e. it has no effect on the functionality of the device.
5.5.4.3.15 .application.activeCrosspointSetting
OID: .1.3.6.1.4.1.21035.41.2.15.0
Syntax: INTEGER (1..16)
Access: read-write
Description: The selection of a string from the .crosspointStringTable (please
refer to chapter 5.5.4.3.16) to apply the corresponding switching
scenario.
.activeCrosspointSetting is not supported by this type of device; i.e.
it has no effect on the functionality of the device.
5.5.4.3.16 .application.crosspointStringTable
The .crosspointStringTable is not implemented for this type of device.
5.5.4.3.16.1 .application.crosspointStringTable.crosspointStringEntry.crosspointStringIndex
OID: .1.3.6.1.4.1.21035.41.2.16.1.1.x
Syntax: INTEGER (1..16)
Access: read-only
Description: A unique value for each table entry ranging between "1" and the
number of entries (i.e. "16").
Not applicable for this type of device, since the
.crosspointStringTable is not implemented.
5.5.4.3.16.2 .application.crosspointStringTable.crosspointStringEntry.crosspointString
OID: .1.3.6.1.4.1.21035.41.2.16.1.2.x
Syntax: OCTET STRING
Access: read-write
Description: A comma separated string that is interpreted as integers describing
a switching scenario of the matrix.
Not applicable for this type of device, since the
.crosspointStringTable is not implemented.
To Next Page
Loading...