Develop ineo 164 - Key Symbols; Original and Paper Indications; Paper Size; Paper Indication

ineo 164 1-19
1.9 Conventions used in this manual
1
Key symbols
[ ]
Key names on the Display or computer screen are indicated by these brackets.
Bold text
Key names on the Control Panel, part names, product names and option names are indicated in bold text.
1.9.2 Original and paper indications
Paper size
The following explains the indication for originals and paper described
in this manual.
When indicating the original or paper size, the Y side represents the
width and the X side the length.
Paper indication
w indicates the paper size with the length (X) being longer than the
width (Y).
v indicates the paper size with the length (X) being shorter than the
width (Y).