Installing using Plug and Play
6
6-6 ineo 164
6.2
7 Click [Browse...].
8 Specify the desired driver folder and click [Open].
% Select a folder according to the driver, operating system, and language to be used.
e.g.: \Win32\English
9 Click [OK], then follow the instructions on the pages that follow.
10 Click [Finish].
This completes the scanner driver installation. The [Found New Hardware Wizard] dialog box appears
again, and the installation of the printer driver begins.
11 Repeat steps 4 through 10 to install the printer driver.
12 After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print-
ers] window.
13 Remove the CD-ROM from the CD-ROM drive.
This completes the installation of the scanner driver and printer driver.
To Next Page
Loading...
